空调怎么验货？汉斯曼10年资深技术主管讲解空调验货标准与方法
炎炎夏日，怎么能少的了空调，那么空调是怎么验货的呢？汉斯曼专业技术主管讲解空调验货服务的标准。
一、电器分类
No critical & Major issue found on package & product after (10 times) drop test according to the standard of ISTA 1A.
2.Product Size /power cord length / WeightMeasurement (量尺寸的时候尺子拉直, 如果卷尺头子有松动, 可以从10cm位置开始测量)
二维码(app个二维码扫描软件, 可以扫描出链接, 如果不能连上, 拍链接照片备注即可)
4.Assembly/installation check
5.Full function check (including the function which only can be checked after fully assembling/installation.)
6.Coating adhesive Tape Test
7.High voltage test
after testing the samples should pass the hi-voltage check, function check, earth continuity check, etc., and no defect found.)
9.Earth continually test if applicable
10.Power consumption check
(如果没有拉力器, 可以吊相应的重量, 这个测试最好不要备注没有仪器)
12.Internal workmanship and critical component check.
13.Rubbing test for rating label and adhesive Test for printing, marking, and logo
14.Stability test (Appliances(other than fixed appliances and hand-held appliances)is placed in any normal position of use on a plane inclined at an angle of 10°to the horizontal, the supply cord resting on the inclined plane in the most unfavorable position.The appliance shall not overturn.)
15.Timer accuracy check (timer should be set as per instruction manual and the actual time should be measured, the timer is set for 2 hours.if no client requirement, the tolerance requirement is: electronics type +/-1minutes, mechanical type +/-10%)then power off, and then power the unit on again with 10 seconds.)
16. Drop test for remote controller (Freelydrop the unit through a height of 1000mm onto a smooth concrete floor with 3mmTvinyle tile 3 times by different position, check the product unit after each drop. Any malfunction /construction broken or other major defect be found.)
